Table of Contents
Advertisement
Chapter 14 Quality of Service (QoS)
14.2.1 Edit QoS Classifier
Click Edit next to a classifier in the QoS > Classifier screen. The Classifier Rule
Configuration screen displays.
Figure 101 Classifier Rule Configuration
The following table describes the labels in this screen.
Table 74 Classifier Rule Configuration
LABEL
Add Rules
Rule Name
Profile
rule name
Current DSCP
priority
DSCP
meter
instance id
Delete
Reset
OK
166
DESCRIPTION
Enter a descriptive name for the QoS classifier rule. Then click OK to add
it to the Profile list below.
This shows the name of the QoS classifier rule.
This displays the current DSCP value.
Enter the IEEE 802.1p priority to which you would like to map this DSCP
value. See
Section 14.7.2 on page 174
802.1p priority.
Enter the DSCP value for the traffic matching the class criteria. The
higher the value, the higher the priority. Lower-priority packets may be
dropped if the total traffic exceeds the capacity of the network.
Enter the meter instance id to assign which meter to process the packet.
Select the checkbox and click OK if you want to delete this classifier rule.
Click this to restore your previously saved settings.
Click this to save your changes.
for more information on the IEEE
P-794H User's Guide
Advertisement
Table of Contents
