Chapter 3 Tutorials
address of the CPE is 192.168.1.3 and it provides an IP of 192.168.1.4 to the
computer on its LAN.
To set up the point-to-point connection between CO and CPE, you need to:
Set Up the
1
Set Up the
2
Connect the
3
3.2.1 Set Up the CO
Log in to the P-794H of the head-quarter that you want to configure as the CO.
1
Click SHDSL > SHDSL Configuration and select CO in the Unit ID field.
2
Select EFM_4-pair as the Wire Mode.
3
Enter 19200 bps in the MinLineRate field and 5696000 in the MaxLineRate
4
field.
34
192.168.1.3
CPE
5696/1920 Kpbs
192.168.1.4
CO.
CPE.
P-794Hs.
192.168.1.1
CO
192.168.1.2
P-794H User's Guide