Table of Contents
Advertisement
7.5.5.2 Edit IPoA
Click the Edit IPoA tab to edit the IPoA settings of the service.
Figure 77 IPoA Routed: Edit IPoA
The following table describes the fields in this screen.
Table 56 IPoA Routed: Edit IPoA
LABEL
SVC
Atmarp
Lifetime
Snmp If Index
If In Octects
If Out Octects
If In Errors
If Out Errors
Packets Sent
Good Packets
Channel Smnp If
Index
Version
P-794H User's Guide
DESCRIPTION
Select true if you want to enable Switched Virtual Circuit (SVC). If
not, select false.
Enter the ATM ARP server you want to use. If you are configuring the
P-794H as the ATM ARP server, enter "here". If you want another
device to be the ATM ARP server, enter the IP address of that device.
Enter the idle time-out for IP over ATM SVCs.
Enter the SNMP If Index in this field.
This shows the number of If octets received on this service.
This shows the number of If octets transmitted on this service.
This shows the number of errored If packets received on this service.
This shows the number of errored If packets transmitted on this
service.
This shows the number of transmitted packets on this service.
This shows the number of good packets received on this service
This shows the Channel SMNP If Index of this service.
This shows the version of the Channel SMNP If Index.
Chapter 7 WAN Setup
119
Advertisement
Table of Contents
