The Wan Connections Screen - ZyXEL Communications P-794H User Manual

7.2 The WAN Connections Screen

Use this screen to change your P-794H's WAN settings. Click Configuration >
WAN connections.
Figure 51 Configuration > WAN connections
The following table describes the fields in this screen.
Table 37 Configuration > WAN connections
LABEL
Service Name
IP/Bridge
Interface Name
Description
Creator
Edit
Delete
Create a new
service
P-794H User's Guide
DESCRIPTION
This shows the name of the WAN connection.
This shows the name of the IP/bridge interface that the connection is
using.
This shows a description for the WAN connection.
This shows the method of how the services are created. By default
command, all ports are created from CLI. If the service is created by
the Web Configurator, this field will show WebAdmin.
Click this if you want to edit the WAN connection. See for more
information.
Click this if you want to remove the WAN connection.
Click this if you want to create a new WAN connection. See for more
information.
Chapter 7 WAN Setup
91