Zyxel Nebula NSG50 - Nebula Cloud Managed Security Gateway Quick Start

Also See for Nebula NSG50:

Table of Contents

Hardware Connection

Connect the power socket to an appropriate power source. Press the power button to turn on the NSG.
Connect your computer to the NSG's LAN port using an Ethernet cable.

Device Configuration - Step 1 Device Configuration - Step 2

http://192.168.1.1
Launch your web browser and type http://192.168.1.1. Your computer must have an IP address in the same subnet as the NSG.
User Name: admin
Password: 1234
Enter admin as the user name and 1234 as the password. Click Login and configure your WAN connection settings in the Configuration > Interface screens. See the NSG User's Guide for detailed information.

NCC Management - Step 1
NCC Management - Step 2

Connect the NSG's WAN port to a modem or router that has Internet access.
Go to the Zyxel Nebula Control Center (NCC) website (http://nebula.zyxel.com). Click Login and you will be redirected to the myZyxel.com portal page. Create an myZyxel.com account and sign in.
Create an organization and a site (network). Use the NSG's first MAC address and serial number (S/N) to register and assign it to the site.

See the User's Guide at www.zyxel.com for more information, including customer support and safety warnings.

EU Importer
Zyxel Communications A/S
Generatorvej 8D, 2860 Søborg, Denmark.
http://www.zyxel.dk

US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001 http://www.us.zyxel.com