The Dhcp Server Screen - ZyXEL Communications AMG1302-T10A User Manual

Chapter 7 LAN Setup
The following table describes the labels in this screen.
Table 23 Network > LAN > IP: Advanced Setup
LABEL
RIP & Multicast Setup
RIP Direction
RIP Version
IGMP Snoop
Back
Apply
Cancel

7.3 The DHCP Server Screen

Use this screen to configure the DNS server information that the Device sends to the DHCP client
devices on the LAN. Click Network > DHCP Server to open this screen.
Figure 40 Network > LAN > DHCP Server
88
DESCRIPTION
Select the RIP direction from None, Both, In Only and Out Only.
Select the RIP version from RIP-1, RIP-2B and RIP-2M.
Select Enabled to activate IGMP Snooping. This allows the Device to passively learn
memberships in multicast groups.
Click this to return to the previous screen without saving.
Click this to save your changes.
Click this to restore your previously saved settings.
AMG1302-T10A User's Guide