Programming Language Reference
DISPlay Subsystem
Date and Time Display
:DISPlay:ANNotation:CLOCk[:STATe] OFF|ON|0|1
:DISPlay:ANNotation:CLOCk[:STATe]?
Turns on and off the display of the date and time on the spectrum
analyzer screen.
Factory Preset
and *RST:
The factory default is On. This parameter is persistent,
which means that it retains the setting previously
selected, even through a power cycle.
Front Panel
Access:
System, Time/Date, Time/Date On Off
Display Annotation Title Data
:DISPlay:ANNotation:TITLe:DATA <string>
:DISPlay:ANNotation:TITLe:DATA?
Enters the text that will be displayed in the user title area of the
display.
Front Panel
Access:
Display, Title
Turn the Entire Display On/Off
:DISPlay:ENABle OFF|ON|0|1
Turns the display on or off. Having the display turned off may increase
repetitive measurement rate.
Factory Preset
and *RST:
On
Remarks:
The following key presses will turn display enable back
on:
1. If in local, press any key
2. If in remote, press the local (system) key
3. If in local lockout, no key
Front Panel
Access:
None
102
Chapter 7