Note
\INSTALL FW" is used to install new rmware into the E4915A/E4916A.
\WRITE ID" is used to write required identication data into the internal
memory of the E4915A/E4916A. See Post Repair Procedure for details.
procedures are not needed to perform for periodic calibration.
Note
Performance Test Data is saved as follows:
Directory
Filename
(\ xxxxxx " shows the last 5 digits of the serial number)
2-8 Adjustments and Performance Tests
Figure 2-2. List Box
C:\E4915_16\DATA_15A
C:\E4915_16\DATA_16A
SNxxxxx
Those