Figure 1-9 Password Security Dialog Box - Agilent Technologies N1913a User Manual

Figure 1-9 Password security dialog box

Click the Submit (accept the default password) and the window opens as
shown in
A LAN reset needs to be performed to ensure that the password is reset to default. See
N O T E
LAN reset procedure as below.
Procedure:
1 Press
2 Press
3 Press
When
N O T E
You can change the password from the Configuring your N1914A Power Meter window as
N O T E
shown in
Password parameter.
Agilent N1913/1914A EPM Series Power Meters User's Guide
Figure 1- 10. The default password is "agilent".
Remote Interfaces
,
1 of 2
softkey to display the second page of the Remote I/F menu.
LAN Reset
softkey to reset the LAN settings to default.
LAN Reset
softkey is pressed, it will also change the GPIB address to default.
Figure 1-10. Scroll down the Parameter column until you locate the Change
to display the Remote Interfaces screen.
Introduction 1
23