114
A
E: T
PPENDIX
ROUBLESHOOTING
Help
Syntax
Description
Repeat Last
Command
Syntax
Description
Self Test
Syntax
Description
When using Flash Load to recover a system, the image is always written
to A:/primary/boot.ppc. If the system primary boot source config directory
parameters were set to boot from another area, the BT command will fail
because it will try to boot from the other area. Use the bt
A:/primary/boot.ppc command to boot the system. Reset the boot
pointers using the SF command. See Appendix F for more information.
H
or
?
The Help command lists all available commands in the boot monitor
along with syntax parameters.
!
The ! command repeats the last command entered.
ST
The ST command sets the self-test action to one of the following
options:
1. Quick
2. Full