Enabling Broadcast Control; Displaying Qos Information; Displaying A Radio Profile's Qos Settings - 3Com WX1200 3CRWX120695A Configuration Manual

Enabling Broadcast
Control
Displaying QoS
Information
Displaying a Radio
Profile's QoS Settings
WX1200# display radio-profile rp1
Beacon Interval:
Max Tx Lifetime:
RTS Threshold:
Long Preamble:
Tune Power:
To enable broadcast control features on a service-profile basis, using the
following commands:
set service-profile name proxy-arp {enable | disable}
set service-profile name dhcp-restrict {enable | disable}
set service-profile name no-broadcast {enable | disable}
For example, to enable all these broadcast control features in service
profile sp1, use the following commands:
WX1200# set service-profile sp1 proxy-arp enable
success: change accepted.
WX1200# set service-profile sp1 dhcp-restrict enable
success: change accepted.
WX1200# set service-profile sp1 no-broadcast enable
success: change accepted.
You can display the following types of information for QoS:
Radio profile QoS settings: QoS mode
Service profile QoS settings: CAC, static CoS, and broadcast control
settings
Broadcast control settings
Default CoS mappings
Individual DSCP-to-CoS or CoS-to-DSCP mappings
The DSCP table (a reference of standard mappings from DSCP to IP
ToS and IP precedence)
QoS Statistics for the MAP forwarding queues
To display the QoS mode and all other settings for a radio profile, use the
following command:
display radio-profile {name | ?}
The following example shows the configuration of radio profile rp1.
100
2000
2346
no
no

Displaying QoS Information

DTIM Interval:
Max Rx Lifetime:
Frag Threshold:
Tune Channel:
Tune Channel Interval:
345
1
2000
2346
yes
3600