Configuring The Terminal Software (Pc) - Fujitsu PRIMERGY RX300 S2 User Manual

C.3

Configuring the Terminal Software (PC)

To use the remote control function, specify the baud rate and flow control method for the terminal
software on the PC.
Set up the PC ports as shown below. (The server ports are fixed to the set values below.)
table: Configuring the Terminal Software
Item
Bits/sec.
Data bit
Parity
Stop bit
Flow control
(Window example)
Contents
9600
8
Not applied
1
Not applied
PRIMERGY RX300 S2 User's Guide
A
301