Stopping The System With The Xscf Command - Fujitsu SPARC M10-4 Service Manual

XSCF> showpparstatus -a
PPAR-ID PPAR Status
00 Powered Off
01 Powered Off
02 Powered Off
Execute the showdomainstatus command to confirm the operating condition
of the logical domain.
XSCF> showdomainstatus -p 0
Logical Domain Name Status
primary Solaris powering down
4S-159-D0-G0 Solaris powering down
4S-159-D0-G1 Solaris powering down
4S-159-D0-G2 Solaris powering down
5.4.1

Stopping the system with the XSCF command

Switch the mode switch on the operation panel to Service mode.
Note -
Log in to the XSCF shell.
Execute the poweroff command.
XSCF> poweroff -a
PPAR-IDs to power off:00,01
Continue? [y|n] : y
00 : Powering off
01 : Powering off
Systems System Operation and Administration Guide
Check that the POWER LED on the operation panel is off.
Fujitsu M10-4/Fujitsu M10-4S/SPARC M10-4/SPARC M10-4S Service Manual ･ February 2014
64
Fujitsu M10/SPARC M10