Table of Contents
Advertisement
▶ Install the screw removed during installation/detaching internal options in
former position. To use a screw of the different kind can cause a breakdown
of equipment.
▶ The procedure of installation on this notes might change depending on a
configuration of option.
3.2.4
Batteries
▶ Incorrect replacement of batteries may lead to a risk of explosion. The
batteries may only be replaced with identical batteries or with a type
recommended by the manufacturer.
▶ Do not throw batteries into the trash can.
Batteries must be disposed of in accordance with local regulations
concerning special waste.
▶ Ensure that you insert the battery the right way round.
▶ The battery used in this server may present a fire or chemical burn hazard if
mistreated. Do not disassemble, heat about 100 °C (212F), or incinerate the
battery.
▶ Replace the lithium battery on the system board in accordance with the
instructions in the corresponding Upgrade and Maintenance Manual,
chapter "System board and components" > "CMOS battery".
▶ All batteries containing pollutants are marked with a symbol (a crossed-out
garbage can). In addition, the marking is provided with the chemical symbol
of the heavy metal decisive for the classification as a pollutant:
Cd Cadmium
Hg Mercury
Pb Lead
3.2.5
Modules with Electrostatic-Sensitive Devices
(ESD modules)
ESD modules are identified by the following sticker:
GX2560 M7
Upgrade and Maintenance Manual
Important information
29
Advertisement
Table of Contents
