Call Channel Selection - Icom ID-1 Instruction Manual

D Selecting with the RC-24
q Push [V/M] to select memory mode.
• "M" appears besde the channel number ndcaton.
[V/M]
1294.500
FM
• Dial selection
w Rotate [DIAL] to select the desred memory channel.
• The programmed memory channels can only be selected.
• Mcrophone's [UP]/[DN] swtches can also be used for the se-
lecton.
• Keypad selection
w Push [F.INP•L] then push the approprate dgt keys to
select the desred memory channel.
• Channel number ndcaton dsappear after pushng [F.INP•L].
• When selectng a channel 00 to 09, push [AFC•
push [AFC• •0]–[MN•9].
LOW
M00
Appears
•0] first then
MEMORY/CALL OPERATION

■ Call channel selection

Call channel s pre-programmed memory channel that can be
accessed by smply clckng call channel button.
The transcever has 3 call channels.
D Selecting with the application
q Clck [CALL] to select memory mode.
• "CALL" and "C" appear.
Click
"CALL" and "C" appear.
• Dial selection
w Left clck or rght clck on [DIAL] to ncrease or decrease
the call channel number.
• Direct channel number input
w Clck on [F.INP] to dsplays keypad screen.
e Clck the approprate numeral key ([1], [2] or [3]) to select
the desred call channel.
• PC keyboard can also be used for the drect channel selecton.
• [CALL] key selection
w Clck [CALL] each tme to select C1 to C3 n sequence.
10
10
72