Icom ID-1 Instruction Manual page 98

12
PRIORITY WATCH
D Operating from the RC-24
q Select VFO mode; then, set an operatng frequency.
w Set the watch channel(s).
For memory channel watch:
Select the desred memory channel.
For call channel watch:
Select the desred call channel by clckng [CALL], then
clck (left or rght) on the [DIAL].
e Push [PRIO• •7] to start the watch.
• "p" blnks durng prorty watch
• The transcever checks the memory or call channel every 5 sec.
• The watch resumes accordng to the selected scan resume con-
dton. (p. 89)
[PRIO• •7]
1294.500
FM
r Push [PRIO• •7] agan to stop the watch.
91
LOW
p 00