Icom ID-1 Instruction Manual page 4

PRECAUTION
DO NOT
push the PTT when not actually desrng to trans-
mt.
DO NOT
allow chldren to play wth any rado equpment con-
tanng a transmtter.
Durng moble operaton,
wthout runnng the vehcle's engne. When the transcever's
power s ON and your vehcle's engne s OFF, the vehcle's bat-
tery wll soon become exhausted.
BE CAREFUL!
eratng t contnuously for long perods.
AVOID
usng or placng the transcever n drect sunlght or n
areas wth temperatures below –10°C (+14˚F) or above +60°C
(+140˚F).
AVOID
the use of chemcal agents such as benzne or alcohol
when cleanng, as they can damage the transcever's surfaces.
USE
Icom mcrophones only (suppled or optonal). Other man-
ufacturer's mcrophones have dfferent pn assgnments and may
damage the transcever f attached.
DO NOT use the suppled CD for any other devces.
The CD s for the ID-1 only.

DO NOT
operate the transcever
The transcever wll become hot when op-
If a connecton cable s dsconnected or has a loose connec-
ton durng operaton, an error may occur. Connect the con-
nectors correctly, and DO NOT touch the connectors durng
operaton.
For the operaton of PC and perpheral devces, follow the n-
structons provded n the manuals whch come wth the PC
and perpheral devces.
Ths devce may cause sgnal nterference when used n a
domestc settng. When nterference occurs, move ths unt
as far as possble away from the affected devce.
All copyrghts assocated wth ths manual and all ntellectual
property rghts assocated wth the hardware and software of
the ID-1 are held by Icom Inc.
Unauthorzed reproducton or transmsson of ths manual, or
any part hereof, s prohbted.
The content of ths manual, the hardware and software asso-
cated wth the ID-1, and the appearance of the ID-1 are all
subject to change wthout notce.
For U.S.A. only
CAUTION:
Changes or modficatons to ths devce, not
expressly approved by Icom Inc., could vod your authorty to
operate ths devce under FCC regulatons.