When ReceVNg A DGTal Call - Icom ID-1 Instruction Manual

7
TRANSMIT AND RECEIVE— VOICE
■ When receiving a Digital call
When an ndvdual staton call s receved, the callng staton
call sgn can be stored nto the receved call record.
The record screen wll automatcally be dsplayed when an
ndvdual staton call s receved.
The record s cleared once turnng power OFF.
D Received call record— application
q When a call s receved durng Dgtal mode operaton,
both Voce and Data, the Receved call record screen ap-
pears automatcally by default.
• Varous nformaton, such as callng staton, called staton, re-
peater call sgns, status, date and callng type, are lsted.
w To reply to a call, clck to select the desred call record
then clck [select] button n the screen.
• The "Caller –>" call sgn s set for call.
• Also, the set call sgn s programmed for staton/repeater call
sgn selecton lst automatcally.
e To close the screen, clck [Close] button or "
screen, or clck [CD] n the man screen.
47
D Received call record— RC-24
q To confirm the receved calls, push [CS•
to enter receve call sgn ndcaton mode.
• "Caller" call sgn s dsplayed.
[CS•
w Push [CS•
• "Called," "RxRPT1" and "RxRPT2" are avalable.
e Rotate [DIAL] to see the other call records.
r To reply a call, select the desred call record then push
[SQL] for 0.5 sec.
• The call sgn s set for the reply call.
• Also, the set call sgn s programmed for staton/repeater call
sgn selecton lst automatcally.
" n the
t To return to operatng condton, push [CS•
0.5 sec. agan.
•1]
Receive Callsign
Caller:
Call sign is displayed here.
•1] to change the record content.
•1] for 0.5 sec.
•1] for