ProgrammNg A Memory/Call Channel - Icom ID-1 Instruction Manual

■ Programming a memory/call channel
VFO settngs, ncludng the set mode contents such as re-
peater tone frequency, offset, can be programmed nto a
memory and call channel.
D Programming from the application
— main screen
q Set the desred frequency n VFO mode.
➥ Set the operatng mode wth [MODE].
➥ Set the frequency usng [DIAL] or keypad.
➥ Set other data (e.g. staton call sgn, tone nformaton,
etc.) f requred.
w Clck [MW] to dsplay the Memory programmng screen.
e Select the desred memory or call channel number by rght
clckng or left clckng on the [DIAL] n the screen.
• Clck "MEMORY" to select memory, or clck "CALL" to select call
channel.
Click to
select
Shows the selected memory
or call channel number and
previously programmed fre-
quency.
r Clck [MW] on the Memory programmng screen to pro-
gram.
Click
t To close the Memory programmng screen, clck [MW] on
the man screen agan or clck " . "
MEMORY/CALL OPERATION
Right click to move memory
or call channel number up.
Left click to move memory or
call channel number down.
Click
10
10
74