AccessNg A DGTal Repeater - Icom ID-1 Instruction Manual

8
REPEATER OPERATION— VOICE
■ Accessing a Digital repeater
D Setting from the application
q Clck [MODE] to select DV (Dgtal voce) mode.
• "DV" appears.
w Set the desred receve frequency
e Clck [RP] several tmes to select the repeater mode.
• Select "RP–" or "RP+."
Appears
r Clck [CS] to dsplay the Select Call Sgn screen, then set
your call sgn n "MY."
• Clck [Y]/[Z] to select the programmed your call sgn.
• When your call sgn s not programmed, enter your call sgn nto
the text box drectly.
t Set the desred staton call sgn n "YOUR."
• When sending a CQ
- Clck [CQ] to dsplays "CQCQCQ" then clck [OK].
• When calling the desired station
- Clck [Z] to select the call sgn.
• When the desred call sgn s not programmed, enter the de-
sred call sgn nto the text box drectly.
61
.
(repeater output frequency)
Click
y Set the desred near-by repeater call sgn n "RPT1" then
clck [OK].
• Clck [Z] to select the call sgn.
• When the desred repeater call sgn s not programmed, enter
the call sgn nto the text box drectly.
• When lnkng repeaters va nternet network (gateway connec-
ton), clckng [G] may be necessary dependng on the repeater
system.
Select/enter the desired call sign
; or click to display "CQCQCQ" for CQ call.
u Clck "Enable" to dsplay "✔," then set the near-by re-
peater call sgn from the desred staton n "RPT2" then
clck [OK], f necessary.
• Clck [Z] to select the call sgn.
• When the desred repeater call sgn s not programmed, enter
the call sgn nto the text box drectly.
• When lnkng repeaters va nternet network (gateway connec-
ton), clckng [G] may be necessary dependng on the repeater
system.
Click if necessary. Click to shows "�" and select/enter the
desired repeater call sign, if desired.
Click if necessary.