StatOn/Repeater Call SGn SettNg - Icom ID-1 Instruction Manual

■ Station/Repeater call sign setting
Staton call sgn must be set for the specfied staton call
as well as repeater operaton n both Dgtal voce and data
modes communcatons.
D Setting with the application
q Clck [CS] to shows the Select Call Sgn screen.
w Type the desred staton/repeater call sgn nto the YOUR's
text box drectly.
• Call sgn s also beng programmed n RPT1 and RPT2.
e Clck [OK] to program.
r Repeat steps w and e to program another staton call
sgn.
Enter the desired call sign
directly.
Click to program.
CALL SIGN SETTING
D Setting with the RC-24
q Push [CS• •1] once to enter call sgn select mode and
select staton call sgn tem.
• "UR" and the selected call sgn appear n the upper lne, staton
call sgn channel number and programmed call sgn appear n
the lower lne.
[CS• •1]
UR :CQCQCQ
E s00:
Record
number
w Rotate [DIAL] to select the desred staton call sgn record
channel to be programmed.
[DIAL]
6
W
Selected call sign
6
42