Other Functions; Set Mode - Icom ID-1 Instruction Manual

■ Set mode

D Set mode operation with the application
q Select "Edt Set Mode(C)..." n Vew menu, clck " " n
tool bar or press [F7] key on the PC keyboard.
• Set Mode screen appears.
w Double clck the desred tem, then select or enter the de-
sred value or condton.
e To close the Set Mode screen, clck " " n tool bar, clck "
" or press [F7] key.

OTHER FUNCTIONS

D Set mode operation with the RC-24
q Push [TXnh• ] for 0.5 sec.
w Push [MODE] or [TXnh•
e Rotate [DIAL] to select the desred value or condton.
r To ext set mode, push [PWR] momentarly.
D Offset Freq.
(Offset Frequency)
Sets the duplex offset frequency wthn 0 to 60 MHz range.
Durng duplex (repeater) operaton, transmt frequency shfts
the set frequency.
(default value may dffer dependng on versons)
12.000
Offset Frequency
14
] to select the desred tem.
13
14
100