Icom ID-1 Instruction Manual page 80

10
MEMORY/CALL OPERATION
• Selecting from Memory Channel screen
w Dsplay the Memory channel screen.
- Select "Edt Memory Channel(M)..." n Vew menu.
- Clck " " n tool bar.
- Press [F6] key on the PC keyboard.
e Double clck, or rght clck the desred channel's "Select"
cell, then select "+ : Move to ths CH" to select the desred
call channel.
• Clck the desred call channel's "Select" cell, then press [Enter]
whle pressng [Ctrl] key on the PC keyboard.
73
Double click the desired
channel's "Select" cell.
Select "+ : Move to this CH".
D Selecting with the RC-24
q Push [CALL] to select call channel
• "C" appears besde the channel number ndcaton.
[CALL]
1294.500
FM
• Dial selection
w Rotate [DIAL] to select the desred call channel.
• Mcrophone's [UP]/[DN] swtches can also be used for the se-
lecton.
• Keypad selection
w Push [F.INP•L] then push the approprate dgt key
([CS• •1], [MHz• •2] or [LOW•3]) to select the de-
sred call channel.
• Channel number ndcaton dsappear after pushng [F.INP•L].
• [CALL] selection
w Push [CALL] each tme to select C1 to C3 n sequence.
LOW
C1
"C" appears.