Call Channel Operation; I Call Channel Selection; I Call Channel Transferring - Icom ID-800H Instruction Manual

I Call channel selection

Call channel is pre-programmed memory channel that can be
accessed by simply pushing call channel button.
➥ Push [M/CALL•PRIO] several times to select the call chan-
nel mode then push [BAND•MODE] to select the desired
call channel.
• "C1" or "C2" appears instead of memory channel number indi-
cation.
• Push [M/CALL•PRIO] several times to select memory mode, or
push [V/MHz•SCAN] to select VFO mode.
[M/CALL•PRIO]
➥ Push and hold [MR/CALL] for 1 sec. to select
MR/CALL
the call channel mode then push [BAND] to
select the desired call channel in the main
band.
• Push [
MR/CALL
[VFO/LOCK] to select VFO mode.
✔INFORMATION

CALL CHANNEL OPERATION

"C1" or "C2" appears
] to select memory mode, or push
When the VFO mode is selec-
ted from the call channel, a
small "c" appears instead of
memory channel number.

I Call channel transferring

q Push
[M/CALL•PRIO]
[BAND•MODE] to select the desired call channel.
• "C1" or "C2" appears.
w Push [S.MW•MW] then rotate [DIAL] to select the mem-
ory channel to receive the transferred information.
• "!" indicator and memory channel number blink.
• To transfer to the VFO, select "-- -- --" with [DIAL] then push.
e Push and hold [S.MW•MW] for 1 sec. to transfer the con-
tents.
z Push and hold [MR/CALL] for 1 sec. then
MR/CALL
push [BAND] to select the desired call chan-
nel.
x Push [FUNC], [
MW
then push [Y Y ]/[Z Z ] to select the memory
channel to receive the transferred informa-
tion.
[Y]/[Z]
• To transfer to the VFO, push [Y Y ]/[Z Z ] to select
"-- -- --".
c Push [FUNC], and then push and hold
BAND
[ A(MW)] for 1 sec. to transfer the con-
CLR
tents.
6
several times then push
A(MW)] momentarily,
CLR
5
6
40