Icom ID-1 Instruction Manual page 43

D Direct frequency input from the application
q Clck [F.INP].
• Keypad screen appears.
w Clck 4 to 7 dgt desred numerc buttons to enter
the desred operatng frequency wthn 1240.000 to
1300.000 MHz range.
• After the 7th dgt s entered, the frequency automatcally fixed
and set to the transcever.
• Clck [ENT] to fix and set the frequency when 4 to 6 dgts are
entered.
• When a dgt s mstakenly nput, clck [CE] to clear the nput,
then nput from the 1st dgt.
• Clck [.] first, when changng frequency below 100 kHz dgts.
Numeric buttons
Hint!
The drect frequency nput can also be performed from the
PC's keyboard.
Enter the desred operatng frequency va the PC's key-
board.
e.g. When enterng 1295.575 MHz;
D Direct frequency input from the RC-24
Click
q Push [F.INP•L]
• Operatng frequency dsappears.
[F.INP•L]
w Push the approprate 7-dgt keys to enter the desred op-
eratng frequency.
• After the 7th dgt s entered, the frequency automatcally fixed
and set to the transcever.
• When a dgt s mstakenly nput, push [F.INP•L] to clear the
nput, then nput from the 1st dgt.
• Push [BK•
dgts.
BASIC OPERATION
[1], [2], [9], [5], [.], [5], [7], [5]
•.] first, when changng frequency below 100 kHz
5
5
36