Call Channel Operation; I Call Channel Selection; I Call Channel Transferring - Icom IC-2725E Instruction Manual

6

CALL CHANNEL OPERATION

I Call channel selection

Call channel is pre-programmed memory channel that can be
accessed by simply pushing call channel button.
Push [M/CALL•MW] several times
to select call channel.
MAIN
T X
"C1" or "C2" appears
➥ Push [MR/CALL] for 1 sec. to select the call
MR/CALL
channel mode then push [Y]/[Z] to select the
desired call channel in the main band.
• Push [
[VFO/LOCK] to select VFO mode.
✔INFORMATION
MAIN
T X
M
37
➥ Push [M/CALL•MW] sev-
eral times to select the
call channel mode then
rotate the same band's
[DIAL] to select the de-
sired call channel.
• "C1" or "C2" appears in-
stead of memory channel
number indication.
• Push the [M/CALL•MW] sev-
eral times to select memory
M
mode, or push the same
band's [V/MHz•SCAN] to se-
lect VFO mode.
] to select memory mode, or push
MR/CALL
When the VFO mode is
selected from the call channel,
a small "c" appears instead of
memory channel number.

I Call channel transferring

q Push the desired band's [M/CALL•MW] several times then
rotate the same band's [DIAL] to select the desired call
channel.
• "C1" or "C2" appears.
w Push the [M/CALL•MW] for 1 sec., then rotate the [DIAL] to
select the memory channel to transfer the contents to.
• "!" indicator and memory channel number blink.
• To transfer to the VFO, select "– –" with the [DIAL] then push the
[M/CALL•MW] for 1 sec.
e Push the [M/CALL•MW] for 1 sec. to transfer the contents.
z Push [MR/CALL] for 1 sec. then push [Y]/[Z]
MR/CALL
to select the desired call channel in the main
band.
x Push [FUNC], [
MW
push [Y]/[Z] to select the memory channel to
transfer the contents to.
• To transfer to the VFO, push [Y]/[Z] to select
[Y]/[Z]
"– –" then push [FUNC], [
c Push [FUNC], then [
transfer the contents.
A(MW)] momentarily, then
CLR
A(MW)] for 1 sec.
CLR
A(MW)] for 1 sec. to
CLR