Memory Name NdCatOn - Icom ID-1 Instruction Manual

■ Memory name indication
Durng memory mode operaton, the programmed memory
name can be dsplayed nstead of the programmed frequency
for your preference.
D Selecting from the application
q Clck [V/M] to select memory mode, f necessary.
• "MEMO" appears.
w Clck [MN] to show the programmed memory name.
• "MN" appears.
• When no memory name s programmed, the programmed fre-
quency s dsplayed.
e To cancel the ndcaton, clck [MN] agan.
Toggles indication with [MN].
D Selecting with the RC-24
q Push [V/M] to select memory mode.
w Select the desred memory channel wth [DIAL] or keypad.
e Push [MN•9] momentarly to toggle the ndcaton between
programmed memory name and frequency.
• "MN ON" or "MN OFF" dsplayed for a whle when memory name
ndcaton or frequency ndcaton s selected, respectvely.
[MN•9]
FM
Click
Icom ID-1
FM
MEMORY/CALL OPERATION
LOW
1294.500 M00
Selected with [MN•9].
LOW
M00
10
10
82