Internet Access - Icom ID-1 Instruction Manual

9
DATA OPERATION

■ Internet access

D Setting from the application
q Clck [MODE] to select DD (Data) mode.
• "DD" appears.
w Set the near-by repeater frequency.
e Clck [RP] several tmes to select "RPS".
Appears
r Clck [CS] to dsplay the Select Call Sgn screen, set your
call sgn n "MY" then clck [OK].
• Clck [Y]/[Z] to select the programmed your call sgn.
• When your call sgn s not programmed, enter your call sgn nto
the text box drectly.
t Set the gateway repeater call sgn n "YOUR" then clck
[OK].
• Clck [Z] to select or enter the call sgn nto the text box drectly.
y Set the desred near-by repeater call sgn n "RPT1."
• Clck [Z] to select or enter the call sgn nto the text box drectly.
65
u Set the gateway repeater call sgn n "RPT2" then clck
[OK].
• Clck [Enable] ("✔" appears) to enable "RPT2" call sgn settng.
• Clck [Z] to select or enter the call sgn nto the text box drectly.
• When the gateway repeater requre the "G" settng, clck [G].
Set the gateway
repeater call sign.
Click
NOTE: When the near-by repeater s gateway repeater, set
the call sgn nto "RPT1" then clck [OK], and skp step u.
• When the repeater requres the "G" settng, clck [G].
Click if necessary.
Set the near-by
repeater call sign.*
Set the gateway
repeater call sign.*
Set your call sign.
*See Note below