ProgrammNg Memory Name - Icom ID-1 Instruction Manual

■ Programming memory name
Each memory channel can be programmed wth an alpha-
numerc channel name for easy recognton and can be nd-
cated ndependently by channel. Names can be a maxmum
of 10 characters.
D Programming from the application
q Dsplay the Memory Channel screen.
- Select "Edt Memory Channel(M)..." n Vew menu.
- Clck " " n tool bar.
- Press [F6] key on the PC keyboard.
w Clck to select "Memory Name" cell of the desred memory
channel.
e Type the desred 10-character memory name from the PC
keyboard.
Click to select then
type the desired
memory name.
r To close the Memory Channel screen, clck " " on the
man screen or repeat the step q.
MEMORY/CALL OPERATION
D Programming with the RC-24
q Push [V/M] to select memory mode.
w Select the desred memory channel wth [DIAL] or keypad.
e Push [MN•9] for 0.5 sec. to enter memory name program-
mng condton.
• 1 short and 1 long beep wll sound.
[MN•9]
Name:
ç å
r Push [CALL] or [MODE] to select the dgt to be edted.
• Pushng [CALL] moves the cursor to left; pushng [MODE]
moves cursor to rght.
[MODE]
[CALL]
10
LOW
10
A AB
80