Icom ID-1 Instruction Manual page 117

D Operating from the RC-24
q Whle recevng an another statons communcaton, push
[CS• •1] then set the ether staton/repeater call sgn
nto "UR" or "RPT1/2" and your call sgn nto "MY."
w Push [BK• •.].
• "BK" appears.
[BK• •.]
1294.500
DV
e When both statons are n standby, transmt to send a
break-n call.
• Programmed call sgn staton receves the break-n call as well
as your call sgn.
r Wat for the reply call from the staton who receve the
break-n call.
t After receve the reply call, communcate normal way.
y To cancel the break-n, push [BK].
• "BK" dsappears.
• How to use the break-in?
Whle operatng wth the call sgn squelch, the squelch
never opens (no audo sounds) even f a call s receved,
unless your own call sgn ("MY") s specfied.
However, when the call ncludng the "BK ON" sgnal
n call)
even f the call s specfied for another staton.
• Station C calling to Station A with "BK OFF"
LOW
00
BK
• Station C calling to Station A with "BK ON"
OTHER FUNCTIONS
s receved, the squelch wll open and audo sounds
Station A and B
are communicating
using the call sign
squelch
Station A
Station B never hears that Sta-
tion C calling Station A.
Station A and B
are communicating
using the call sign
squelch
Station A
Station B also hears that Sta-
tion C is calling Station A.
14
(break-
Station B
Station C
14
Station B
Station C
110