1
Operations and
Administration
Chassis Viewer
Chassis Viewer is QLogic's browser-based device management software. Chassis
Viewer provides the primary management interface for the QLogic 12000 switches,
allowing the user to perform management, configuration, and monitoring tasks
related to InfiniBand networks.
• Chassis Viewer runs on the firmware of the 12200, 12300 and each management
module of the 12800 series.
• The browser must be on a workstation which has connectivity to the
LAN port on the switch.
• Management Workstation Requirements
• Browser Level: Internet Explorer 6.0+ or Mozilla Firefox1.6.x+
• To access Chassis Viewer, point a browser to the IP address of the switch.
• If user authentication is enabled, the following screen is displayed:
•
Enter the default user name and password:
D000101-000
Figure 1-1 User Authentication
Username: admin
Password: adminpass
RJ-45 OOB
1-1