Show Supported Switchtype - Dell Networking 7048 Reference Manual

show supported switchtype

Use the show supported switchtype command in User EXEC mode to display
information about all supported switch types.
Syntax
show supported switchtype [
switchindex — Specifies the index into the database of the supported
•
switch types, indicating the type of the switch being preconfigured. The
switch index is a 32-bit integer. (Range: 0–65535)
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
The switch SID is used when pre-configuring switches in a stack using the
member command in config-stack mode.
Example
The following example displays the information for supported switch types.
console>show supported switchtype
SID
-----------------------------------------------------
2 PCT6248 1 0x100b000
The following table describes the fields in the example.
Field
Switch Index (SID)
switchindex
Switch Model ID
Description
This field displays the index into the database of
supported switch types. This index is used when
preconfiguring a member to be added to the
stack.
]
System Management Commands
Mgmt Code
Pref Type
1679