Show System - Dell Networking 7048 Reference Manual

SFS Last Attempt Status........... None
Serial Number..................... none
Up Time........................... 0 days 2 hrs 14 mins 54 secs
console#
Example – SDM Templates
This example shows the SDM Mismatch value in the Switch Status field.
console#show switch
ManagementStandby PreconfigPlugged-inSwitchCode
SWSwitchStatusModel IDModel IDStatusVersion
-- ---------- ------ ------------- ------------- -----------
1Mgmt SwANFirebolt-48ANFirebolt-48OK2.24.17.48
2ANFirebolt-48ANFirebolt-48SDM Mismatch 2.24.17.48

show system

Use the show system command in User EXEC mode to display system
information.
Syntax
unit
show system [ ]
unit — The unit number.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays system information.
1689
System Management Commands