Dell Networking 7048 Reference Manual page 1684

Unit
Detected Code in Flash
SFS Last Attempt Status
CPLD Version
Serial Number
Up Time
Example – All Units in the Stack
This example displays information about all units in the stack.
console>show switch
Switch Management
Status
-------------------------------------------------------------
1 Mgmt Switch
Different fields in the display are explained as follows:
Unit
Switch
Management Status
Preconfigured Model Identifier
1684
System Management Commands
Description
This field displays the version of code that is
currently stored in FLASH memory on the
switch. This code will execute after the switch is
reset. If the switch is not present and the data is
from pre-configuration, then the code version is
"None."
This field displays the Stack Firmware
Synchronization status.
This field displays the Complex Programmable
Logic Device version.
This field displays the Switch serial number.
This field displays the system up time.
Preconfig Plugged-in
Model ID Model ID
PCM8024 PCM8024
Description
This field displays the unit identifier assigned to
the switch.
This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.
This field displays the model identifier of a
preconfigured switch ready to join the stack.
The Model Identifier is a 32-character field
assigned by the switch manufacturer to identify
the switch.
Switch Code
Status Version
1.0.0.0