Show Supported Cardtype - Dell Networking 7048 Reference Manual

Parameter
Pluggable
If you supply a value for slot/port, the following additional information
appears as shown in the table below.
Parameter
Inserted Card Model Identifier
Inserted Card Description
Configured Card Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Config mode and all Config sub-modes
User Guidelines
The command has no user guidelines.

show supported cardtype

Use the show supported cardtype command in User EXEC mode to display
information about all card types supported in the system. If a card index is
entered, then the command displays information about specific card types
supported in the system. Card index values are specific to each family of
products. Use the generic form (without specifying an index) to display all the
card types for a product family.
Description
Cards are pluggable or non-pluggable in
the slot.
Description
The model identifier of the card inserted
in the slot. Model identifier is a 32-
character field used to identify a card.
This field is displayed only if the slot is
full.
The card description. This field is
displayed only if the slot is full.
The description of the card preconfigured
in the slot.
System Management Commands
1677