Figure 6-47. The Browse Hub Configuration Option
Viewing Multiple Hub Configuration Screens in the Console
To browse multiple hub configuration values, perform the following steps:
Type 4 and press [Enter] from the Main Menu. The Hub Console
1.
Interface displays the Diagnostics Menu.
Type 3 and press [Enter]. The Hub Console Interface displays the
2.
following prompt:
About to dump stack configuration start capture or log
file.
Press ENTER to continue
Press [Enter].
3.
The Hub Console Interface displays a continuous dump of screens from
the environments listed above.
4.
Press Ctl-S to stop the screen from scrolling. See the screen on the
following page for a stopped dump midway between two screens.
5.
Press Ctrl-Q to direct the Hub Console Interface to continue scrolling.
6.
Review values from the screen in which you are interested. To capture
the values in a log file, go to the next section.
Configuration Reference
Be ready to stop the
screen quickly. Once
you press Enter, the
contents of almost a
dozen Hub Console
screens will be
scrolled.
6-107