EPSON EPL-C8000
3.2.16.4 DEVE. FAN Removal (PL13.1.5)
1. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
2. Disconnect the connector (P/J82) for the DEVE. FAN and release
the harness from the FAN DUCT.
3. Widen the hooks on the FAN DUCT and remove the DEVE. FAN.
n When installing the DEVE. FAN, set the side with the
maker label on it facing outside.
n When installing the DEVE. FAN, route the harness
properly.
Chapter 3
Disassembly and Assembly/Adjustment
Figure 3-139. DEVE. FAN Removal
Revision B
3-113