Xerographics; Drum Cartridge Removal (Pl6.1.10); Waste Toner Box Removal (Pl6.1.12) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.9 Xerographics

3.2.9.1 DRUM CARTRIDGE Removal (PL6.1.10)

1. Open the FRONT COVER ASSEMBLY.
2. Turn the TENSION LEVER to the unlocking position to release the
DRUM CARTRIDGE from the IBT BELT ASSEMBLY.
NOTE: In the following step, do not touch the drum surface of the
DRUM CARTRIDGE.
NOTE: After removing the DRUM CARTRIDGE, place the cartridge
level on a safe place and keep it out direct sunlight.
3. Turn the drum cartridge lock lever to the unlocking position and
draw the DRUM CARTRIDGE enough to hold the belt on the top,
then take out the DRUM CARTRIDGE horizontally and remove it.
Figure 3-58. DRUM CARTRIDGE Removal
When installing the drum cartridge, make sure the
positioning labels on the drum cartridge are properly
aligned wit the corresponding labels on the XL RAIL
ASSEMBLY.
Chapter 3 Disassembly and Assembly/Adjustment

3.2.9.2 WASTE TONER BOX Removal (PL6.1.12)

1. Open the FRONT COVER ASSEMBLY.
NOTE: After removing the WASTE TONER BOX in the following
step, place it level on a safe place.
2. Push down the tab on the hook of the WASTE TONER BOX and
take out the WASTE TONER BOX horizontally to remove.
Figure 3-59. WASTE TONER BOX Removal
When installing the WASTE TONER BOX, make sure the
hook for the WASTE TONER BOX securely fits in the
locking position.
Revision B
3-52