Electrical Specification - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

1.2.6 Electrical Specification

o AC line noise:
n Pulse width:
50 to 1000 ns
n Pulse polarity:
n Repeat:
Not synchronized
n Modes:
Common/normal
n Voltage:
1kv (However, the parts can withstand up to
2kv without damage.)
o Instant cutoff:
DIP 100% (at rated voltage-10%) for one
cycle with normal print quality.
o Electrostatic durability:
No possibility of any error which affects on print quality under the
following conditions.
n Atmospheric discharging:
n Contact discharging:
o Rush current:
1/2 cycle, 100A or less
o Insulation resistance: 10 M
o Dielectric strength:
There is no breakdown when the following voltages are applied for
one minute.
n 100V/120V model:
AC 2000V (Between primary and secondary sides)
AC 1000V (Between primary side and chassis)
n 220V/240V model:
AC 2000V (Between primary and secondary sides)
AC 1500V (Between primary side and chassis)
Chapter 1 PRODUCT DESCRIPTIONS
8KV
6KV
or more
o Leakage current:
n 100 V model:
0.5mA or less
n 120V model:
3.5mA or less
n 220V/240V model:
3.5mmA or less
Condition: 1.5K
(between non-metallic parts and frames)
Rev. B
, 0.15uF
1-15