Regularly Replaced Part Replacement; Installation - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

6.4 Regularly Replaced Part Replacement

Table below list the regularly replaced parts and the corresponding
reference sections.
If you have replaced any of the regularly replaced parts, perform the
relevant counter reset in the Maintenance Menu.
Table 6-1. Regularly Replaced Part
Unit
2ND BTR ASSEMBLY
MAIN FUSER ASSEMBLY
Chapter 6 MAINTENANCE
Reference Section
Section 3.2.11.5
Section 3.2.12.3

6.5 Installation

This section describes provides a guideline for installing the printer on
its place.
o Power
Connect the printer power cable to a dedicated wall outlet. Do not
share the outlet power with other extension cords. Make sure the
power meets the power specifications defined for this printer. (The
maximum power consumption of this printer is 1100W.))
Plug the cord directly into the wall outlet which can
provide more than the maximum demand power for
the printer.
o Ground
The printer must be properly grounded.
Ground the printer by one of the following methods:
n Wall outlet ground terminal
n Buried conductive material such as copper in the
ground 650mm or deeper
n Grounded terminal (Type 3).
NOTE:Do not ground the printer to the following:
-Gas pipes
-Telephone line grounding terminal
-Water pipes partially made of plastic
Rev. B
6-15