Internal Cooling Fan Removal; Separating The Printer - Epson EPL-N2700 Service Manual

EPSON EPL-N2700 / N2750

4.2.4.6 Internal Cooling Fan Removal

1. Remove the Transfer Unit. (See Section 4.2.4.2.)
2. Disconnect the motor harness from the connector.
3. Remove two screws (3704) securing the Internal Cooling Fan to the
vertical transport door, and remove the Internal Cooling Fan.
Figure 4-15. Internal Cooling Fan Removal
C H E C K
Be suer to install the fan with its ventilation side facing
P O I N T
outward.
Disassembly/Assembly

4.2.5 Separating the Printer

1. Remove 1 screw (3727) securing the frame to the back of the
Cassette 1, and remove the frame.
2. Disconnect the harness linking the printer and the Cassette 1
control board from the connector (PJ1).
3. Remove four screws securing four holders which hold the MP
Cassette in the printer and the Cassette 1, and remove the holders.
4. Separate the Cassette 1 from the MP Cassette.
Disassembly Procedure
Figure 4-16. Holder Removal
Revision B
109