EPSON EPL-C8000
FIP-1.22 ROS ASSY Related Error
Step
Check point
Perform the preliminary inspection.
1
Parts to inspect: ROS ASSY, MCU PWB
Isolation: Engine or Controller?
Run the Engine test print or diagnostic test print.
2
(10 sheets for each of single and continuous print)
l
Are the outputs normal?
Chapter 5
TROUBLESHOOTING
Remedy
Yes
Replace/reinstall the defective part(s).
Check the Controller PWB.
If the problem still occurs, go to FIP-
2.19 "ROS ASSY is Defective".
No
Go to Step 2.
Go to FIP-2.19 "ROS ASSY is
Defective".
Rev. B
5-36