Wiring Diagram - §11 - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000
A.3.3.11 Wiring Diagram - §11
Table A-33. Wiring Diagram - §11
Signal Name
MSI EDGE PAPER SENSED Signal from the MSI Edge Sensor to detect the
(L) 5VDC paper in the MSI paper feeder. (High: No paper/
Low: Paper in the feeder)
• This signal controls the paper feed interval in the
MSI OHP SENSED (L) 5VDC Signal from the MSI OPH Sensor to detect the OHP
film on the MSI Assembly.
MSI LONG PAPER SENSED Signal from the MSI Long N/P Sensor to detect the
(L) 5VDC paper on the MSI Assembly. (High: No paper/Low:
Paper on the MSI Assembly)
• This signal is valid only when the print control
MSI SHORT PAPER SENSED Signal from the MSI Short N/P Sensor to detect the
(L) 5VDC paper on the MSI Assembly. (High: No paper/Low:
Paper on the MIS Assembly)
• This signal is valid only when the print control
MSI CLUTCH ON (L) 24VDC Control signal to turn the MSI Clutch ON/OF.
PICK UP SOLENOID ON (L) Control signal to turn the Pick Up Solenoid ON/
24VDC OFF.


MSI Clutch coil resistance: 172


Pick Up Solenoid coil resistance: 90
Chapter A APPENDIX
Description
2UP mode.
specifies the paper size 150mm or longer in the
transportation direction.
specifies the paper size shorter than 150mm in
the transportation direction.
10% (20 C)
10% (20 C)
Rev. B
A-53