Epson ColorPage EPL-C8000 Service Manual page 342

EPSON EPL-C8000
Table 5-14. Error Message List (9/9)
o Write Error Data DIM
LED status On Line = off, Continue = off
Explanation Attempted to write to ROM module; write operation failed to
terminate normally; block 2 missing from the program DIMM (slot
P); specified device value was improper. (Manual explanation
shall identify this as a system-device write error caused by
inappropriate attempt to write to the system.)
Turn off the printer.
Solution 1.
Perform a Reset All operation.
2.
If error recurs, service the printer.
3.
o Write Error Data RAM
LED status On Line = off, Continue = off
Explanation No data area within RAM allocated as code area; or write
operation failed to terminate normally. (The explanation in the
manual shall identify this as a system-device write error caused by
an inappropriate attempt to write to system.)
Turn off the printer.
Solution 1.
Perform a Reset All operation.
2.
If error recurs, service the printer.
3.
Chapter 5 TROUBLESHOOTING
Rev. B
5-8