Main Fuser Assembly Removal (Pl9.1.2) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.12.3 MAIN FUSER ASSEMBLY Removal (PL9.1.2)

1. Remove the EXIT TRAY ASSEMBLY. (See Section 3.2.13.1.)
2. Remove the OIL ROLL ASSEMBLY. (See Section 3.2.12.1.)
3. Remove the FUSER ASSEMBLY. (See Section 3.2.12.2.)
4. Disconnect 2 connectors (P/J72B, P/J79) for the MAIN FUSER
ASSEMBLY.
5. Remove 2 screws (gold, with a washer, 8mm) securing the MAIN
FUSER ASSEMBLY, and remove the MAIN FUSER ASSEMBLY.
After replacing the MAIN FUSER ASSEMBLY with a new
one, perform "Fuser Unit Reset". (See Chapter 6.)
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-95. MAIN FUSER ASSEMBLY Removal
Revision B
3-79