Tro Sensor Removal (Pl8.2.12) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.11.9 TRO SENSOR Removal (PL8.2.12)

1. Remove the TOP COVER ASSEMBLY. (See Section 3.2.4.3.)
2. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
3. Remove the DRUM CARTRIDGE. (See Section 3.2.9.1.)
4. Remove the TENSION LEVER. (See Section 3.2.11.1.)
5. Remove the INNER COVER ASSEMBLY. (See Section 3.2.4.4.)
6. Remove the MSI TRAY ASSEMBLY. (See Section 3.2.7.1.)
7. Pull out the MAIN P/H ASSEMBLY with the MSI ASSEMBLY on it.
(See Section 3.2.8.1.)
8. Remove the ROS ASSEMBLY. (See Section 3.2.9.3.)
9. Remove the ADC SENSOR ASSEMBLY. (See Section 3.2.9.4.)
10. Remove the XL RAIL ASSEMBLY. (See Section 3.2.9.5.)
11. Remove the HVPS. (See Section 3.2.16.2.)
12. Remove the TRANSFER ASSEMBLY. (See Section 3.2.11.2.)
13. Remove the screw (gold, tapped, 10mm) securing the TRO
SENSOR and remove the TRO SENSOR.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-92. TRO SENSOR Removal
Revision B
3-77