Epson ColorPage EPL-C8000 Service Manual page 325

EPSON EPL-C8000
(2) Statuses
Status
LIFCNTR
LIFLIMR
TIMSETR
TIMUNITR
TIMMINR
TIMMAXR
CTLVALR
CTLSETR
CTLACCSR
CTLMINR
CTLMAXR
STCCNTR
LIFEDEFR
TIMDEFR
CTLDEFR
LIFWNGR
LIFWDEFR
CRIDR
CRMDR
NOTE: The parameter codes V1 through V8 are in decimal. Display the values from the upper
Chapter 4 DIAGNOSTICS
Table 4-64. Status List of the Parameter Control
Status code
Parameter code
(Hex)
1.LIFE, 2.V1, 3.V2, 4.V3, 5.V4,
D0
6.V5, 7.V6, 8.V7, 9.V8
1.LIFE, 2.V1, 3.V2, 4.V3, 5.V4,
D1
6.V5, 7.V6, 8.V7, 9.V8
D2 1.TIM, 2.V1, 3.V2, 4.V3
D3 1.TIM, 2.UNIT
D4 1.TIM, 2.V1, 3.V2, 4.V3
D5 1.TIM, 2.V1, 3.V2, 4.V3
D6 1.CTL, 2.V1, 3.V2, 4.V3
D7 1.CTL, 2.V1, 3.V2, 4.V3
D8 1.CTL, 2.ACCESS
D9 1.CTL, 2.V1, 3.V2, 4.V3
DA 1.CTL, 2.V1, 3.V2, 4.V3
DB 1.STC, 2.V1, 3.V2, 4.V3
1.LIFE, 2.V1, 3.V2, 4.V3,
DC
5. V4
DD 1.TIM, 2.V1, 3.V2, 4.V3
DE 1.CTL, 2.V1, 3.V2, 4.V3
F0 1.LIFE, 2.V1, 3.V2, 4.V3, 5. V4
F1 1.LIFE, 2.V1, 3.V2, 4.V3, 5. V4
F2 1.ID
1.V1, 2. V2, 3.V3, 4. V4, 5. V5, 6.
F3
V6, 7. V7
byte so that it can be read normally.
Description
[Response] Life counter
[Response] Life-over value
[Response] Time-out value
[Response] Time-out unit
[Response] Minimum time-out value
[Response] Maximum time-out value
[Response] Controlled value by the
control value.
[Response] Control value.
[Response] Privilege to access the
control value.
[Response] Minimum control value
[Response] Maximum control value
[Response] Statistical counter
[Response] Default life-over value
[Response] Default time-out value
[Response] Default control value
[Response] Life warning
[Response] Default life warning
[Response] CRUM ID
[Response] CRUM data
Rev. B
4-55