Size Switch Assembly Removal (Pl3.1.9) - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

3.2.6.6 SIZE SWITCH ASSEMBLY Removal (PL3.1.9)

1. Draw the UNIVERSAL TRAY out.
2. Remove the REAR COVER ASSEMBLY. (See Section 3.2.4.5.)
3. Remove the LVPS. (See Section 3.2.16.1.)
NOTE: In the following step, the OPTION BRACKET is kept
connected to the printer body with a harness. Therefore, do
not move the SIZE BRACKET ASSEMBLY too away from
the printer.
4. Remove 2 screws (black, cup head, 8mm) securing the SIZE
BRACKET ASSEMBLY and separate the SIZE BRACKET
ASSEMBLY from the printer body.
5. Disconnect the connector (P/J102) for the SIZE SWITCH
ASSEMBLY and remove the SIZE BRACKET ASSEMBLY.
6. Remove the screw (black, cup head, 12mm) securing the SIZE
SWITCH ASSEMBLY and remove the SIZE SWITCH ASSEMBLY
from the SIZE SWITCH ASSEMBLY.
Chapter 3 Disassembly and Assembly/Adjustment
Figure 3-23. SIZE SWITCH ASSEMBLY Removal
Revision B
3-24