Operation Modes - Epson ColorPage EPL-C8000 Service Manual

EPSON EPL-C8000

2.6 Operation Modes

The printer has the following 7 operation modes:
o WARM-UP:
The printer is warming up to be print ready.
o READY:
After warm-up, the printer is waiting to print.
o PRINTING:
The printer is printing.
o LIGHT SLEEP:
Standby level 1
The printer is in a mode in which, to save energy,
the Fuser control temperature is low.
o DEEP SLEEP:
Staneby level 2
The printer is in a mode in which, to save
energy, power is not supplied to the Fuser,
Fuser Fan or Developer Fan.
o DIAGNOSTIC TEST: The printer can accept a diagnostic
command or is running a diagnostic.
o ERROR:
The printer has detected an error
(exceptions: Empty Tray error, No Paper
error, end of life errors).
The following shows the transition paths among the modes.
Chapter 2 OPERATING PRINCIPLES
Figure 2-40. Transition Paths among the Modes
Rev. B
2-44