Diagnostics By The Diagnostic Commander; Introduction; Configuration - Epson ColorPage EPL-C8000 Service Manual

Color laser printer

Hide thumbs Also See for ColorPage EPL-C8000:

Table of Contents

EPSON EPL-C8000

4.2 Diagnostics by the Diagnostic Commander

The diagnostic system is included on the CONTROLLER PWB, and the

diagnostic commander is not always performed.

However, if you have replaced the MCU PWB, you need to perform

[Service] function using the Diagnostic Commander.

You can run the various diagnostic routines and execute/set the various

settings for the printer using the diagnostic tool (maintenance tool). The

following figure shows the system configuration to perform the

diagnostics. You can run the diagnostic commander (application

software) on a personal computer and control the Diagnostic PWB to

send a command to the MCU PWB.

NOTE: The Diagnostic PWB, RS-232C cable, personal computer, and

Diagnostic Commander are collectively called the diagnostic tool

(maintenance tool). Diagnostic tool provided by SEIKO EPSON

is as shown in the following table:

Table 4-1. Diagnostic Commander Tools

#F691 DIAGNOSTIC TOOL

#F728 SELF TRAINING KIT

Figure 4-3. DIAG Tool Configuration

Diagnostic PWB (board) and

Diagnostic Commander (2 floppy

Table of Contents